Learn how to sew a seam either by machine or by hand with some scrap pieces of fabric before moving on to your sewing projects. Sewing a straight seam is one of the first things beginner sewers need to do.
- 2 scraps of fabric. I like using 5 x 5 inch (12 x 12cm) pieces as they are easy to handle.
- Your sewing machine
- All-purpose sewing foot This is your regular straight stitching foot that comes with your machine. It is usually all metal or half metal and half plastic. On most modern machines it will snap on but older machines may have a screw mechanism for attaching.
How to Sew a Seam – Pin the Edges
Step 1: Pin the Fabric
Pin your two pieces of fabric with the RIGHT sides together at the raw edge.
This means the right sides (correct sides or printed sides) will be facing each other. If you are using plain fabric it may not have a right or wrong side. Other fabrics will be faded at the back so it will be obvious which is the right and wrong sides.
I like to use the vertical method of pinning as I find it faster to remove. This means the pins are placed vertically along the edge with the heads sticking out from the edge of the fabric. It is a personal preference which way you place the pins.
Once you get confident with sewing seams you will probably be able to sew a straight seam without pins.
An alternative to using pins is to hand baste the seam with an up and down running stitch. This will hold the fabric pieces in place without you having to worry about sewing over pins and breaking a needle.
How to Sew a Seam
Step 2: Set the Seam Allowance
Refer to your pattern instructions to find out what your seam allowance is.
This is the distance you will be sewing from the edge. Common seam allowances are 1/2 inch (12mm) or 5/8 inch (15mm).
Place your fabric under the foot with the needle on the seam allowance line and hold the threads.
You should start at least 1/4 inch (6mm) from the edge so that the whole foot is on the fabric.
The reason you should hold the threads to the back is so they don’t get caught under the foot or in the machine. You will only be holding them to start and not the whole time you are sewing.
How to Sew a Seam by Machine
You don’t need to measure the seam allowance. Most machines will have markings on the metal plate or in front of the foot so you can align the edge of the fabric with the markings.
On this machine, the measurements are in inches on the metal at the back and you can see the millimeters on the front plastic.
Step 3: Backstitch
Set your stitch length on 2.5. This is a good average setting to test on your fabric. The width should be 0 since we are doing a straight stitch.
Still holding the threads, backstitch almost to the edge. This simply means you take a few stitches backward.
There is normally a button on the front of your machine to go backward. When the button is pressed in it sews backward and when released it sews forward.
Don’t go off the edge. Most likely, this backstitching will only be 3 or 4 stitches. This is enough.
How to Sew a Seam at the Ends – Back stitching will stop the ends from unraveling, making your seam much stronger under stress.
Step 4: stitch Forwards
Stop backstitching, then release the threads in your fingers and start stitching forwards.
Start sewing forwards in a straight line along the seam allowance line. Use the guides in the needle plate to keep nice and straight.
Step 5: Backstitch the End
Backstitch the end of the seam as well.
Stop 1/4 inch (6mm) from the edge, press the back button and take a few stitches backward.
To remove the fabric from the machine, lift the foot and make sure the needle is up. Pull the fabric out and cut the threads.
If your needle is down, you can turn the handwheel on the side of the machine to slowly lift it up.
Step 6: Press
Open up your piece, press and there it is. A nice straight seam!
How to sew a seam by machine is finished and now on to how to sew a seam by hand.
HOW TO SEW A SEAM – DIFFERENT TYPES
How to Sew a Seam – Knits
Sewing knits witch a machine is almost the same as for woven fabrics with one exception. Instead of using a straight stitch, it is better to use a narrow zig-zag stitch. The reason a zig-zag is better is that it will stretch with the fabric preventing stitches popping.
How to Sew a Seam – Curves and Corners
Sewing gentle curves is easily done by gently swinging the fabric around as you sew. It is best done in one motion with your machine on a slow speed setting. If you don’t have speed settings, then put your foot down lightly to sew.
Sharper curves may result in you having to stop and lift the presser foot to release bunched up fabric. Put the presser foot down and start sewing again. The sharper the curve the more times you will need to do this. For really tight curves you may need to use the hand wheel to move the needle even more slowly.
Corners are easier to sew than curves. Stop at the curve, lift the presser foot, pivot and put the foot back down again.
How to Sew a Seam – Specialty Seams
French seams are a specialty seam used on fine and sheer fabrics as well as items such as pillowcases that need to be extra durable to withstand repeated washes. It is most suitable for straight or gently curved seams. See how to raw edges of the seam are completely enclosed.
How to Sew a Seam – French Seam
Felled seams are useful for thicker fabrics such as denim where you need to hide the raw edges. A felled seam will look smooth on both the inside and outside.